BACnetClientBackupBACnetDevice (FB) ¶ FUNCTION_BLOCK PUBLIC FINAL BACnetClientBackupBACnetDevice EXTENDS BACnetClientBase Common Behaviour Model conform (ETrigA) FB to initiates a backup procedure for an BACnet device. If execution completed successfully and xDone is TRUE, the request was successful. In any other case eStatus and errorResult may hold additional information of what failed. InOut: Scope Name Type Initial Comment Inherited from Input xExecute BOOL Rising edge: Starts defined operation FALSE : Resets the defined operation after ready condition was reached ETrigATo xAbort BOOL TRUE : Aborts the operation ETrigATo udiTimeOut UDINT Max. operating time for executing [µs], 0: No operating time limit ETrigATo Output xDone BOOL TRUE : Ready condition reached ETrigATo xBusy BOOL TRUE : Operation is running ETrigATo xError BOOL TRUE : Error condition reached ETrigATo xAborted BOOL TRUE : Abort condition reached ETrigATo Input dwTargetDeviceNumber DWORD The device number of the targeted device in the BACnet- Network. BACnetClientBase pTargetDeviceAddress POINTER TO CmpBACnet.IEC_BACNET_ADDRESS 0 Optional : The device address of the targeted device in the BACnet-Network. If an adress is given the given device number is ignored. BACnetClientBase Output eStatus CmpBACnet.IEC_BACNET_STATUS CmpBACnet.IEC_BACNET_STATUS.BACNET_STATUS_OK If an error occured, the error state. BACnetClientBase errorResult CmpBACnet.IEC_BACNET_ERROR STRUCT(tag := CmpBACnet.IEC_BACNET_FAILURE_TYPE._FAILURE_MAX_SIZE) If an error occured (this means eStatus <> BACNET_STATUS_OK), whereas the sent BACnet-Request was answered with an specific error information, the latter is contained in this structure. BACnetClientBase iState DINT 0 The State in which the FB is during execution: 0: No execution, resetted state 1: Searching for the Target-Device and a valid address for it 2: Sending the BACnet-Request into the network 3: Waiting for the answer (if there is one) to the BACnet-Request made in 2 4: Finishing the call, setting of the output variables BACnetClientBase Input deviceInstance CmpBACnet.IEC_BACNET_DWORD The device instance number to backup. password CmpBACnet.IEC_BACNET_STRING The optional password needed for the backup procedure. If no password is needed for this procedure set the string type to BACNET_STRING_NONE. pathToStoredFiles POINTER TO CmpBACnet.IEC_BACNET_BYTE The path to the storage location of file object data received. callback CmpEventMgr.ICmpEventCallback An event-callback interface to inform about failures and progress information during the procedure execution. Properties: Instance , inherited from BACnetClientBase Running , inherited from BACnetClientBase Server , inherited from BACnetClientBase SourceDeviceAddress , inherited from BACnetClientBase SourceDeviceNumber , inherited from BACnetClientBase TargetDeviceAddress , inherited from BACnetClientBase TargetDeviceNumber , inherited from BACnetClientBase Methods: Request SampleInputs InitializeOutputs , inherited from BACnetClientBase RegisterToServer , inherited from BACnetClientBase UnregisterFromServer , inherited from BACnetClientBase Structure: Request (Method) SampleInputs (Method)

BACnetClientBackupBACnetDevice.Request (METH) ¶ METHOD PROTECTED Request : CmpBACnet.IEC_BACNET_STATUS InOut: Scope Name Type Return Request CmpBACnet.IEC_BACNET_STATUS

BACnetClientDeleteObject.SampleInputs (METH) ¶ METHOD PROTECTED SampleInputs

BACnetClientDeviceCommControl (FB) ¶ FUNCTION_BLOCK PUBLIC FINAL BACnetClientDeviceCommControl EXTENDS BACnetClientBase Common Behaviour Model conform (ETrigA) FB to execute a Device-Comm-Control-Reqeust in the BACnet-Network. If execution completed successfully, xDone is TRUE. InOut: Scope Name Type Initial Comment Inherited from Input xExecute BOOL Rising edge: Starts defined operation FALSE : Resets the defined operation after ready condition was reached ETrigATo xAbort BOOL TRUE : Aborts the operation ETrigATo udiTimeOut UDINT Max. operating time for executing [µs], 0: No operating time limit ETrigATo Output xDone BOOL TRUE : Ready condition reached ETrigATo xBusy BOOL TRUE : Operation is running ETrigATo xError BOOL TRUE : Error condition reached ETrigATo xAborted BOOL TRUE : Abort condition reached ETrigATo Input dwTargetDeviceNumber DWORD The device number of the targeted device in the BACnet- Network. BACnetClientBase pTargetDeviceAddress POINTER TO CmpBACnet.IEC_BACNET_ADDRESS 0 Optional : The device address of the targeted device in the BACnet-Network. If an adress is given the given device number is ignored. BACnetClientBase Output eStatus CmpBACnet.IEC_BACNET_STATUS CmpBACnet.IEC_BACNET_STATUS.BACNET_STATUS_OK If an error occured, the error state. BACnetClientBase errorResult CmpBACnet.IEC_BACNET_ERROR STRUCT(tag := CmpBACnet.IEC_BACNET_FAILURE_TYPE._FAILURE_MAX_SIZE) If an error occured (this means eStatus <> BACNET_STATUS_OK), whereas the sent BACnet-Request was answered with an specific error information, the latter is contained in this structure. BACnetClientBase iState DINT 0 The State in which the FB is during execution: 0: No execution, resetted state 1: Searching for the Target-Device and a valid address for it 2: Sending the BACnet-Request into the network 3: Waiting for the answer (if there is one) to the BACnet-Request made in 2 4: Finishing the call, setting of the output variables BACnetClientBase Input nTimeDuration CmpBACnet.IEC_BACNET_UNSIGNED The duration time of the DCC-Request. dccValue CmpBACnet.IEC_BACNET_DCC_VALUE The DCC-Value to be set. password WSTRING(255) The (perhaps existing) password necessary to set the DCC value. Properties: Instance , inherited from BACnetClientBase Running , inherited from BACnetClientBase Server , inherited from BACnetClientBase SourceDeviceAddress , inherited from BACnetClientBase SourceDeviceNumber , inherited from BACnetClientBase TargetDeviceAddress , inherited from BACnetClientBase TargetDeviceNumber , inherited from BACnetClientBase Methods: InitializeOutputs Request SampleInputs RegisterToServer , inherited from BACnetClientBase UnregisterFromServer , inherited from BACnetClientBase Structure: InitializeOutputs (Method) Request (Method) SampleInputs (Method)

BACnetClientCreateObject.SampleInputs (METH) ¶ METHOD PROTECTED SampleInputs

BACnetClientDeleteObject (FB) ¶ FUNCTION_BLOCK PUBLIC FINAL BACnetClientDeleteObject EXTENDS BACnetClientBase Common Behaviour Model conform (ETrigA) FB to execute a Delete-Object-Reqeust in the BACnet-Network. If execution completed successfully and xDone is TRUE no additional variable gets its contents updated, but it is indicated, that the deletion succeeded. InOut: Scope Name Type Initial Comment Inherited from Input xExecute BOOL Rising edge: Starts defined operation FALSE : Resets the defined operation after ready condition was reached ETrigATo xAbort BOOL TRUE : Aborts the operation ETrigATo udiTimeOut UDINT Max. operating time for executing [µs], 0: No operating time limit ETrigATo Output xDone BOOL TRUE : Ready condition reached ETrigATo xBusy BOOL TRUE : Operation is running ETrigATo xError BOOL TRUE : Error condition reached ETrigATo xAborted BOOL TRUE : Abort condition reached ETrigATo Input dwTargetDeviceNumber DWORD The device number of the targeted device in the BACnet- Network. BACnetClientBase pTargetDeviceAddress POINTER TO CmpBACnet.IEC_BACNET_ADDRESS 0 Optional : The device address of the targeted device in the BACnet-Network. If an adress is given the given device number is ignored. BACnetClientBase Output eStatus CmpBACnet.IEC_BACNET_STATUS CmpBACnet.IEC_BACNET_STATUS.BACNET_STATUS_OK If an error occured, the error state. BACnetClientBase errorResult CmpBACnet.IEC_BACNET_ERROR STRUCT(tag := CmpBACnet.IEC_BACNET_FAILURE_TYPE._FAILURE_MAX_SIZE) If an error occured (this means eStatus <> BACNET_STATUS_OK), whereas the sent BACnet-Request was answered with an specific error information, the latter is contained in this structure. BACnetClientBase iState DINT 0 The State in which the FB is during execution: 0: No execution, resetted state 1: Searching for the Target-Device and a valid address for it 2: Sending the BACnet-Request into the network 3: Waiting for the answer (if there is one) to the BACnet-Request made in 2 4: Finishing the call, setting of the output variables BACnetClientBase Input objType CmpBACnet.IEC_BACNET_OBJECT_TYPE The type of the object to be deleted. objInst CmpBACnet.IEC_BACNET_DWORD The instance number of the object to be deleted. Properties: Instance , inherited from BACnetClientBase Running , inherited from BACnetClientBase Server , inherited from BACnetClientBase SourceDeviceAddress , inherited from BACnetClientBase SourceDeviceNumber , inherited from BACnetClientBase TargetDeviceAddress , inherited from BACnetClientBase TargetDeviceNumber , inherited from BACnetClientBase Methods: InitializeOutputs Request SampleInputs RegisterToServer , inherited from BACnetClientBase UnregisterFromServer , inherited from BACnetClientBase Structure: InitializeOutputs (Method) Request (Method) SampleInputs (Method)

BACnetClientConfTextMessage.SampleInputs (METH) ¶ METHOD PROTECTED SampleInputs

BACnetClientDeviceManagement ¶ Function blocks for BACnet client functionalities in the area of BACnet device management are collected in this folder. BACnetClientBackupBACnetDevice (FunctionBlock) Request (Method) SampleInputs (Method) BACnetClientCreateObject (FunctionBlock) InitializeOutputs (Method) Request (Method) SampleInputs (Method) BACnetClientDeleteObject (FunctionBlock) InitializeOutputs (Method) Request (Method) SampleInputs (Method) BACnetClientDeviceCommControl (FunctionBlock) InitializeOutputs (Method) Request (Method) SampleInputs (Method) BACnetClientReinitializeDevice (FunctionBlock) InitializeOutputs (Method) Request (Method) SampleInputs (Method) BACnetClientRestoreBACnetDevice (FunctionBlock) Request (Method) SampleInputs (Method) BACnetClientTimeSynchronization (FunctionBlock) InitializeOutputs (Method) Request (Method) SampleInputs (Method) BACnetClientUTCTimeSynchronization (FunctionBlock) InitializeOutputs (Method) Request (Method) SampleInputs (Method)

BACnetClientDeviceCommControl.InitializeOutputs (METH) ¶ METHOD PROTECTED InitializeOutputs

BACnetClientDeviceCommControl.Request (METH) ¶ METHOD PROTECTED Request : CmpBACnet.IEC_BACNET_STATUS InOut: Scope Name Type Return Request CmpBACnet.IEC_BACNET_STATUS