IoDrvCIFXProfiNet Library Documentation ¶ Company 3S - Smart Software Solutions GmbH Title IoDrvCIFXProfiNet Version 3.5.15.0 Categories Intern|IoDrivers Namespace IoDrvCIFXProfiNetLibrary Author 3S - Smart Software Solutions GmbH Placeholder IoDrvCIFXProfiNet Description 1 ¶ IO Driver ProfiNet for Hilscher NetX chip. Contents: ¶ CommFB SUBSLOT_ID (Function) Constants IoConfigParameterIDs (GVL) NetXErrorCodes (GVL) PNConfigParameters (ParamList) Datastructs Diag IO_SIGNALS (Enum) TIOSignal (Struct) Diagnosis CIFXProfinetControllerDiag (FunctionBlock) InterfaceUnion (Union) IoDrvCIFXProfiNetDiag (FunctionBlock) PNSlaveDiag (FunctionBlock) FunctionBlocks CIFXProfinetController (FunctionBlock) IoDrvCIFXProfiNet (FunctionBlock) PNSlave (FunctionBlock) Functions UDINT_TO_HEX (Function) Indices and tables ¶ 1 Based on IoDrvCIFXProfiNet.library, last modified 24.07.2019, 08:41:55. LibDoc 4.4.0.0-b.27 The content file IoDrvCIFXProfiNet.clean.json was generated with CODESYS V3.5 SP15 on 24.07.2019, 08:41:57.

SUBSLOT_ID (FUN) ¶ FUNCTION SUBSLOT_ID : DWORD InOut: Scope Name Type Initial Comment Return SUBSLOT_ID DWORD Input EN BOOL TRUE optional ID DWORD Handle to a PN-slave or a subslot API DWORD 0 currently only 0 is supported SLOT UINT Slot number SUBSLOT UINT Subslot number Output ENO BOOL

CommFB ¶ SUBSLOT_ID (Function)

Constants ¶ IoConfigParameterIDs (GVL) NetXErrorCodes (GVL) PNConfigParameters (ParamList)

IoConfigParameterIDs (GVL) ¶ InOut: Scope Name Type Initial Comment Constant PN_CFG_NUM_OF_INPUTS UDINT 16#0 PN_CFG_NUM_OF_OUTPUTS UDINT 16#10000 PNM_MODULE_PARAM_OFFSET UDINT 512 PNM_MODULE_PARAM_ID UDINT 513 PN_PRM_VENDOR_ID UDINT 1 PN_PRM_DEVICE_ID UDINT 2 PN_PRM_REVISION_ID UDINT 3 PN_PRM_IDENTIFY_ONOFF UDINT 7 PN_PRM_STATION_NAME UDINT 10 PN_PRM_MAC_ADDRESS UDINT 11 PN_PRM_IP_ADDRESS UDINT 12 PN_PRM_NETMASK UDINT 13 PN_PRM_MODULEIDENTNUMBER UDINT 14 PN_PRM_STATION_TYPE UDINT 16 15 Identdata

NetXErrorCodes (GVL) ¶ InOut: Scope Name Type Initial Comment Constant TLR_E_PNIO_APCTL_COMMAND_INVALID UDINT 16#C00C0001 TLR_E_PNIO_APCTL_RSC_OUTOFMEMORY UDINT 16#C00C0002 MessageId: TLR_E_PNIO_APCTL_RSC_OUTOFMEMORY MessageText: Unsufficient memory to handle the request. TLR_E_PNIO_APCTL_HIF_IDENT UDINT 16#C00C0003 MessageId: TLR_E_PNIO_APCTL_HIF_IDENT MessageText: Error indetifying HIF. TLR_E_PNIO_APCTL_AREA_IDENT UDINT 16#C00C0004 MessageId: TLR_E_PNIO_APCTL_AREA_IDENT MessageText: Unable to identify requested DPM Channel. TLR_E_PNIO_APCTL_GETAREA_IDENT UDINT 16#C00C0005 MessageId: TLR_E_PNIO_APCTL_GETAREA_IDENT MessageText: Unable to identify DPM section “STD INPUT”. TLR_E_PNIO_APCTL_SETAREA_IDENT UDINT 16#C00C0006 MessageId: TLR_E_PNIO_APCTL_SETAREA_IDENT MessageText: Unable to identify DPM section “STD OUTPUT”. TLR_E_PNIO_APCTL_SETAREA_INFO_GET UDINT 16#C00C0007 MessageId: TLR_E_PNIO_APCTL_SETAREA_INFO_GET MessageText: Unable to get configuration for DPM section “STD OUTPUT”. TLR_E_PNIO_APCTL_TOHOST_MBX_NAME_GET UDINT 16#C00C0008 MessageId: TLR_E_PNIO_APCTL_TOHOST_MBX_NAME_GET MessageText: Unable to identify DPM section “TOHOST MBX”. TLR_E_PNIO_APCTL_TOHOST_MBX_INFO_GET UDINT 16#C00C0009 MessageId: TLR_E_PNIO_APCTL_TOHOST_MBX_INFO_GET MessageText: Unable to get configuration for DPM section “TOHOST MBX”. TLR_E_PNIO_APCTL_MIDSYS_QUE_IDENT UDINT 16#C00C000A MessageId: TLR_E_PNIO_APCTL_MIDSYS_QUE_IDENT MessageText: Unable to identify queue to MidSys. TLR_E_PNIO_APCTL_ENABLE_BUSON_CBK UDINT 16#C00C000B MessageId: TLR_E_PNIO_APCTL_ENABLE_BUSON_CBK MessageText: Enabling callback function for ApplicationCOS.BUS_ON bit did not succeed. TLR_E_PNIO_APCTL_ENABLE_APPREADY_CBK UDINT 16#C00C000C MessageId: TLR_E_PNIO_APCTL_ENABLE_APPREADY_CBK MessageText: Enabling callback function for ApplicationCOS.APP_READY bit did not succeed. TLR_E_PNIO_APCTL_COMMONAREA_IDENT UDINT 16#C00C000D MessageId: TLR_E_PNIO_APCTL_COMMONAREA_IDENT MessageText: Unable to identify DPM section “COMMON STATUS”. TLR_E_PNIO_APCTL_STATUSAREA_IDENT UDINT 16#C00C000E MessageId: TLR_E_PNIO_APCTL_STATUSAREA_IDENT MessageText: Unable to identify DPM section “EXTENDED STATUS”. TLR_E_PNIO_APCTL_CONTROLAREA_IDENT UDINT 16#C00C000F MessageId: TLR_E_PNIO_APCTL_CONTROLAREA_IDENT MessageText: Unable to identify DPM section “CONTROL”. TLR_E_PNIO_APCTL_GETAREA_INT_ENBL UDINT 16#C00C0010 MessageId: TLR_E_PNIO_APCTL_GETAREA_INT_ENBL MessageText: Unable to enable DPM section “STD INPUT”. TLR_E_PNIO_APCTL_SETAREA_INT_ENBL UDINT 16#C00C0011 MessageId: TLR_E_PNIO_APCTL_SETAREA_INT_ENBL MessageText: Unable to enable DPM section “STD OUTPUT”. TLR_E_PNIO_APCTL_ENABLE_INIT_CBK UDINT 16#C00C0012 MessageId: TLR_E_PNIO_APCTL_ENABLE_INIT_CBK MessageText: Enabling callback function for ApplicationCOS.INITIALIZATION bit did not succeed. TLR_E_PNIO_APCTL_VOL_IDENT UDINT 16#C00C0013 MessageId: TLR_E_PNIO_APCTL_VOL_IDENT MessageText: Unable to identify SysVolume. TLR_E_PNIO_APCTL_VOL_MOUNT UDINT 16#C00C0014 MessageId: TLR_E_PNIO_APCTL_VOL_MOUNT MessageText: Unable to mount SysVolume TLR_E_PNIO_APCTL_FAT_FRMT UDINT 16#C00C0015 MessageId: TLR_E_PNIO_APCTL_FAT_FRMT MessageText: Unable to format SysVolume. TLR_E_PNIO_APCTL_QUE_CREATE UDINT 16#C00C0016 MessageId: TLR_E_PNIO_APCTL_QUE_CREATE MessageText: The Queue for APCTL task could not be created. TLR_E_PNIO_APCTL_CMCTL_QUE_IDENT UDINT 16#C00C0017 MessageId: TLR_E_PNIO_APCTL_CMCTL_QUE_IDENT MessageText: The Queue for CMCTL task could not be identified. TLR_E_PNIO_APCTL_MGT_QUE_IDENT UDINT 16#C00C0018 MessageId: TLR_E_PNIO_APCTL_MGT_QUE_IDENT MessageText: The Queue for MGT task could not be identified. TLR_E_PNIO_APCTL_ACP_QUE_IDENT UDINT 16#C00C0019 MessageId: TLR_E_PNIO_APCTL_ACP_QUE_IDENT MessageText: The Queue for ACP task could not be identified. TLR_E_PNIO_APCTL_GETAREA_INFO_GET UDINT 16#C00C001A MessageId: TLR_E_PNIO_APCTL_GETAREA_INFO_GET MessageText: Unable to get configuration for DPM section “STD INPUT”. TLR_E_PNIO_APCTL_CLR_PCK_GET UDINT 16#C00C001B MessageId: TLR_E_PNIO_APCTL_CLR_PCK_GET MessageText: Unable to get a free packet from packet pool to unregister DPM channel from rcX. TLR_E_PNIO_APCTL_SET_PCK_GET UDINT 16#C00C001C MessageId: TLR_E_PNIO_APCTL_SET_PCK_GET MessageText: Unable to get a free packet from packet pool to register DPM channel from rcX. TLR_E_PNIO_APCTL_IDENT_QUE_MIDSYS UDINT 16#C00C001D MessageId: TLR_E_PNIO_APCTL_IDENT_QUE_MIDSYS MessageText: The Queue of rcX MidSys task could not be identified. TLR_E_PNIO_APCTL_CREATE_TIMER_SET UDINT 16#C00C001E MessageId: TLR_E_PNIO_APCTL_CREATE_TIMER_SET MessageText: The timer for firmware-controlled handling of IO-data in DPM could not be created. TLR_E_PNIO_APCTL_MEMALLOC_TIMER_SET UDINT 16#C00C001F MessageId: TLR_E_PNIO_APCTL_MEMALLOC_TIMER_SET MessageText: Not enough free memory available for firmware-controlled handling of IO-data in DPM. TLR_E_PNIO_APCTL_WDG_INIT UDINT 16#C00C0020 MessageId: TLR_E_PNIO_APCTL_WDG_INIT MessageText: The Watchdog timer could not be initialized. TLR_E_INFO_FIELD_ONE_CREATE_FAILED UDINT 16#C00C0021 MessageId: TLR_E_INFO_FIELD_ONE_CREATE_FAILED MessageText: The field for extended APCTL task status information could not be created. TLR_E_INFO_FIELD_TWO_CREATE_FAILED UDINT 16#C00C0022 MessageId: TLR_E_INFO_FIELD_TWO_CREATE_FAILED MessageText: An undefined field could not be created (unused). TLR_E_PNIO_APCTL_POOL_CREATE UDINT 16#C00C0023 MessageId: TLR_E_PNIO_APCTL_POOL_CREATE MessageText: The packet pool for APCTL task could not be created. TLR_E_PNIO_APCTL_IOCR_LIST UDINT 16#C00C0024 MessageId: TLR_E_PNIO_APCTL_IOCR_LIST MessageText: The number of the input IOCRs is not equal to the number of the output IOCRs. TLR_E_PNIO_APCTL_DPM UDINT 16#C00C0025 MessageId: TLR_E_PNIO_APCTL_DPM MessageText: The requested function is not supported because DPM is not initialized. TLR_E_PNIO_APCTL_ENABLE_LOCKCONFIG_CBK UDINT 16#C00C0026 MessageId: TLR_E_PNIO_APCTL_ENABLE_LOCKCONFIG_CBK MessageText: Enabling callback function for ApplicationCOS.LOCK_CONFIGURATION bit did not succeed. TLR_E_PNIO_APCTL_LED_CREATE UDINT 16#C00C0027 MessageId: TLR_E_PNIO_APCTL_LED_CREATE MessageText: The LEDs could not be initialized. TLR_E_PNIO_APCTL_RPC_REQUEST_LIMIT_REACHED UDINT 16#C00C0030 The following codes are used by Benjamin MessageId: TLR_E_PNIO_APCTL_RPC_REQUEST_LIMIT_REACHED MessageText: Too many outstanding RPC-requests for this IO-Device. TLR_E_PNIO_APCTL_PACKET_SEND_FAILED UDINT 16#C00C0031 MessageId: TLR_E_PNIO_APCTL_PACKET_SEND_FAILED MessageText: Error while sending internal message to another task. TLR_E_PNIO_APCTL_INVALID_CMCTL_HANDLE UDINT 16#C00C0032 MessageId: TLR_E_PNIO_APCTL_INVALID_CMCTL_HANDLE MessageText: The handle used for IO-Device is wrong. TLR_E_PNIO_APCTL_INVALID_NAME_OF_STATION_LENGTH UDINT 16#C00C0033 MessageId: TLR_E_PNIO_APCTL_INVALID_NAME_OF_STATION_LENGTH MessageText: The name to be set has incorrect length. TLR_E_PNIO_APCTL_DCP_REQUEST_LIMIT_REACHED UDINT 16#C00C0034 MessageId: TLR_E_PNIO_APCTL_DCP_REQUEST_LIMIT_REACHED MessageText: Too many outstanding DCP-requests for this IO-Device. TLR_E_PNIO_APCTL_OTHER_CONFIG_PACKET_IN_PROCESS UDINT 16#C00C0035 MessageId: TLR_E_PNIO_APCTL_OTHER_CONFIG_PACKET_IN_PROCESS MessageText: An other configuration packet is in process wait for its confimation packet. TLR_E_PNIO_APCTL_APCFG_QUE_IDENT UDINT 16#C00C0036 MessageId: TLR_E_PNIO_APCTL_APCFG_QUE_IDENT MessageText: Identification of APCFG queue in remote resources failed. TLR_E_PNIO_APCTL_UNKNOWN_ALARM_SPECIFIER UDINT 16#C00C0037 MessageId: TLR_E_PNIO_APCTL_UNKNOWN_ALARM_SPECIFIER MessageText: The Alarmspecifier is unknown to IO-Controller. TLR_E_PNIO_APCTL_APPLICATION_ALREADY_REGISTERED UDINT 16#C00C0040 MessageId: TLR_E_PNIO_APCTL_APPLICATION_ALREADY_REGISTERED MessageText: There is alredy an Application registered to APCTL-Task. TLR_E_PNIO_APCTL_NO_APPLICATION_REGISTERED UDINT 16#C00C0041 MessageId: TLR_E_PNIO_APCTL_NO_APPLICATION_REGISTERED MessageText: There is no Application registered to APCTL-Task. TLR_E_PNIO_APCTL_UNREGISTER_APPLICATION_IMPOSSIBLE UDINT 16#C00C0042 MessageId: TLR_E_PNIO_APCTL_UNREGISTER_APPLICATION_IMPOSSIBLE MessageText: It is impossible to unregister the Application in APCTL-Task. Either there is no Application registered or the Unregister Request was not send by the registered Application. TLR_E_PNIO_APCTL_CHANNEL_INIT_REQUESTED UDINT 16#C00C0050 MessageId: TLR_E_PNIO_APCTL_CHANNEL_INIT_REQUESTED MessageText: The request is rejected because a Channel Init was requested. TLR_E_PNIO_APCTL_BUS_STATE_OFF UDINT 16#C00C0051 MessageId: TLR_E_PNIO_APCTL_BUS_STATE_OFF MessageText: The request is rejected because bus state is set OFF or a running request was interrupted by setting bus state to OFF. TLR_E_PNIO_APCTL_CYCLIC_WATCHDOG_ERROR UDINT 16#C00C0052 MessageId: TLR_E_PNIO_APCTL_CYCLIC_WATCHDOG_ERROR MessageText: The connection to an IO-Device was closed because too many cyclic frames were missing. TLR_E_PNIO_APCTL_CONNECTION_CLOSED_BY_IODEVICE UDINT 16#C00C0053 MessageId: TLR_E_PNIO_APCTL_CONNECTION_CLOSED_BY_IODEVICE MessageText: The connection was shutdown by an IO-Device. TLR_E_PNIO_APCTL_WATCHDOG_TIME_TOO_SMALL UDINT 16#C00C0054 TLR_E_PNIO_APCTL_WATCHDOG_TIME_TOO_BIG UDINT 16#C00C0055 TLR_E_PNIO_APCTL_IO_DEVICE_NOT_IN_DATAEXCHANGE UDINT 16#C00C0056 TLR_E_PNIO_APCTL_ACYCLIC_REQ_FAILED_REMOTE UDINT 16#C00C0060 TLR_E_PNIO_APCTL_ACYCLIC_REQ_FAILED_RPC UDINT 16#C00C0061 TLR_E_PNIO_APCTL_ACYCLIC_REQ_FAILED_INTERNAL UDINT 16#C00C0062 TLR_E_PNIO_APCTL_TOO_MUCH_IO_DATA_CONFIGURED UDINT 16#C00C0063 TLR_E_PNIO_APCTL_INVALID_IP_ADDRESS UDINT 16#C00C0064 TLR_E_PNIO_APCTL_INVALID_NETMASK UDINT 16#C00C0065 TLR_E_PNIO_APCTL_INVALID_GATEWAY UDINT 16#C00C0066 TLR_E_PNIO_APCTL_TOO_MUCH_DATA_REQUESTED UDINT 16#C00C0067 TLR_E_PNIO_APCFG_COMMAND_INVALID UDINT 16#C0140001 TLR_E_PNIO_APCFG_DBM_UNKNOWN_VERSION UDINT 16#C0140002 MessageId: TLR_E_PNIO_APCFG_DBM_UNKNOWN_VERSION MessageText: Unknown DBM version. TLR_E_PNIO_APCFG_DBM_NO_DATASET UDINT 16#C0140003 MessageId: TLR_E_PNIO_APCFG_DBM_NO_DATASET MessageText: No dataset existing. TLR_E_PNIO_APCFG_DBM_WRONG_SIZE_OF_DATASET UDINT 16#C0140004 MessageId: TLR_E_PNIO_APCFG_DBM_WRONG_SIZE_OF_DATASET MessageText: Wrong size of DBM dataset. TLR_E_PNIO_APCFG_DBM_WRONG_LEN_TYPEOFSTATION UDINT 16#C0140005 MessageId: TLR_E_PNIO_APCFG_DBM_WRONG_LEN_TYPEOFSTATION MessageText: Type of station is too large. TLR_E_PNIO_APCFG_DBM_WRONG_LEN_NAMEOFSTATION UDINT 16#C0140006 MessageId: TLR_E_PNIO_APCFG_DBM_WRONG_LEN_NAMEOFSTATION MessageText: Name of station is too large. TLR_E_PNIO_APCFG_DBM_UNKNOWN_IOCR_KEY UDINT 16#C0140007 MessageId: TLR_E_PNIO_APCFG_DBM_UNKNOWN_IOCR_KEY MessageText: Unkwown IOCR relationship in submodule description. TLR_E_PNIO_APCFG_DBM_IOCR_ALREADY_IN_USE UDINT 16#C0140008 MessageId: TLR_E_PNIO_APCFG_DBM_IOCR_ALREADY_IN_USE MessageText: IOCR is in use by another IO-Device. TLR_E_PNIO_APCFG_DBM_WRONG_IOCR_IN_SUBMDESCR UDINT 16#C0140009 MessageId: TLR_E_PNIO_APCFG_DBM_WRONG_IOCR_IN_SUBMDESCR MessageText: Wrong IO-Type of IOCR in submodule description. TLR_E_PNIO_APCFG_DBM_WRONG_DATALEN_IN_SUBMDESCR UDINT 16#C014000A MessageId: TLR_E_PNIO_APCFG_DBM_WRONG_DATALEN_IN_SUBMDESCR MessageText: Wrong data length in submodule description. TLR_E_PNIO_APCFG_DBM_WRONG_DATADESCR_IN_SUBMDESCR UDINT 16#C014000B MessageId: TLR_E_PNIO_APCFG_DBM_WRONG_DATADESCR_IN_SUBMDESCR MessageText: Wrong IO-type in data description of the submodule description. TLR_E_PNIO_APCFG_DBM_UNEXP_SUBMDESCR UDINT 16#C014000C MessageId: TLR_E_PNIO_APCFG_DBM_UNEXP_SUBMDESCR MessageText: Unexpected submodule description. TLR_E_PNIO_APCFG_DBM_MISSING_SUBMDESCR UDINT 16#C014000D MessageId: TLR_E_PNIO_APCFG_DBM_MISSING_SUBMDESCR MessageText: Missing submodule description. TLR_E_PNIO_APCFG_DBM_ASSERTION_FAILED UDINT 16#C014000E MessageId: TLR_E_PNIO_APCFG_DBM_ASSERTION_FAILED MessageText: Assertion failed. TLR_E_PNIO_APCFG_PKT_UNEXP_TREE_IDENTIFICATON UDINT 16#C014000F MessageId: TLR_E_PNIO_APCFG_PKT_UNEXP_TREE_IDENTIFICATON MessageText: Wrong sequence/numbering in the tree identification numbers. TLR_E_PNIO_APCFG_PKT_OVERWRITING_CONSISTING_DATA UDINT 16#C0140010 MessageId: TLR_E_PNIO_APCFG_PKT_OVERWRITING_CONSISTING_DATA MessageText: Addressed dataset is already existing and would be overwritten. TLR_E_PNIO_APCFG_PKT_MISSING_IOCR UDINT 16#C0140011 MessageId: TLR_E_PNIO_APCFG_PKT_MISSING_IOCR MessageText: Input or output IOCR of module is missing. TLR_E_PNIO_APCFG_PKT_WRONG_IO_TYPE_IN_IOCR UDINT 16#C0140012 MessageId: TLR_E_PNIO_APCFG_PKT_WRONG_IO_TYPE_IN_IOCR MessageText: Wrong input or output type in IOCR. TLR_E_PNIO_APCFG_PKT_WRONG_SEQUENCE_OF_FRAGMENTED_PACKETS UDINT 16#C0140013 MessageId: TLR_E_PNIO_APCFG_PKT_WRONG_SEQUENCE_OF_FRAGMENTED_PACKETS MessageText: Wrong sequence of fragmented packets. TLR_E_PNIO_APCFG_PKT_WRONG_FRAGMENT_IDENTIFIER UDINT 16#C0140014 MessageId: TLR_E_PNIO_APCFG_PKT_WRONG_FRAGMENT_IDENTIFIER MessageText: Wrong fragment identifier in fragmented packets. TLR_E_PNIO_APCFG_PKT_CONFIGURATION_IS_ALREADY_DONE_VIA_DBM UDINT 16#C0140015 MessageId: TLR_E_PNIO_APCFG_PKT_CONFIGURATION_IS_ALREADY_DONE_VIA_DBM MessageText: Configuration is already done via DBM configuration packets are not accepted. TLR_E_PNIO_APCFG_DBM_INCOMPLETE_CONFIGURATION UDINT 16#C0140016 MessageId: TLR_E_PNIO_APCFG_DBM_INCOMPLETE_CONFIGURATION MessageText: Incomplete configuration - not all devices are fully developet until submodule descriptions. TLR_E_PNIO_APCFG_PKT_DOWNLOAD_ALREADY_FINISHED UDINT 16#C0140017 MessageId: TLR_E_PNIO_APCFG_PKT_DOWNLOAD_ALREADY_FINISHED MessageText: Paket download is already finished by download finish request. TLR_E_PNIO_APCFG_DBM_UNEXP_NUMBER_OF_RECORDS_IN_PNIOC_TABLES UDINT 16#C0140018 MessageId: TLR_E_PNIO_APCFG_DBM_UNEXP_NUMBER_OF_RECORDS_IN_PNIOC_TABLES MessageText: More than one entry for one key was found in the tables of the fieldbus specific data. TLR_E_PNIO_APCFG_DBM_UNEXP_SIGNAL_ATTRIBUT UDINT 16#C0140019 MessageId: TLR_E_PNIO_APCFG_DBM_UNEXP_SIGNAL_ATTRIBUT MessageText: Unexpected parameter Signal_Attrib in SIGNALS table. TLR_E_PNIO_APCFG_DBM_IMPROPER_DPM_OFFSETS_AND_DATA_LENGTHS_IN_SIGNALS UDINT 16#C014001A MessageId: TLR_E_PNIO_APCFG_DBM_IMPROPER_DPM_OFFSETS_AND_DATA_LENGTHS_IN_SIGNALS MessageText: Improper DPM offset and data length in SIGNALS. TLR_E_PNIO_APCFG_DBM_WRONG_TEST_DATA UDINT 16#C0140020 MessageId: TLR_E_PNIO_APCFG_DBM_WRONG_TEST_DATA MessageText: Wrong test data. TLR_E_PNIO_APCFG_DBM_INVALID_IO_DEVICE_AMOUNT UDINT 16#C0140021 MessageId: TLR_E_PNIO_APCFG_DBM_INVALID_IO_DEVICE_AMOUNT MessageText: Too many IO-Devices are configured. TLR_E_PNIO_APCFG_RESOURCE_OUT_OF_MEMORY UDINT 16#C0140030 standard error codes MessageId: TLR_E_PNIO_APCFG_RESOURCE_OUT_OF_MEMORY MessageText: Not enough memory available for current request. TLR_E_PNIO_APCFG_PACKET_SEND_FAILED UDINT 16#C0140031 MessageId: TLR_E_PNIO_APCFG_PACKET_SEND_FAILED MessageText: Error while sending internal message to another task. TLR_E_PNIO_CMCTL_COMMAND_INVALID UDINT 16#C00A0001 TLR_E_PNIO_STATUS UDINT 16#C00A0002 MessageId: TLR_E_PNIO_STATUS MessageText: Generic error code. See packets data-status code for details. TLR_E_PNIO_CMCTL_INIT_PARAM_INVALID UDINT 16#C00A0010 CMCTL MessageId: TLR_E_PNIO_CMCTL_INIT_PARAM_INVALID MessageText: Invalid parameter in CMCTL_ResourceInit(). TLR_E_PNIO_CMCTL_RESOURCE_LIMIT_EXCEEDED UDINT 16#C00A0011 MessageId: TLR_E_PNIO_CMCTL_RESOURCE_LIMIT_EXCEEDED MessageText: No more CMCTL protocol machines possible. TLR_E_PNIO_CMCTL_RESOURCE_OUT_OF_MEMORY UDINT 16#C00A0012 MessageId: TLR_E_PNIO_CMCTL_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory for this request to CMCTL. TLR_E_PNIO_CMCTL_CLOSED UDINT 16#C00A0013 MessageId: TLR_E_PNIO_CMCTL_CLOSED MessageText: This CMCTL protocol machine was closed. TLR_E_PNIO_CMCTL_STATE_CONFLICT UDINT 16#C00A0014 MessageId: TLR_E_PNIO_CMCTL_STATE_CONFLICT MessageText: This request can not be served in current CMCTL state. TLR_E_PNIO_CMCTL_CONFIG_PENDING UDINT 16#C00A0015 MessageId: TLR_E_PNIO_CMCTL_CONFIG_PENDING MessageText: The state of CMCTL’s managment resource is pending. TLR_E_PNIO_CMCTL_CONFIG_STATE_INVALID UDINT 16#C00A0016 MessageId: TLR_E_PNIO_CMCTL_CONFIG_STATE_INVALID MessageText: The state of CMCTL’s managment resource is invalid. TLR_E_PNIO_CMCTL_PACKET_OUT_OF_MEMORY UDINT 16#C00A0017 MessageId: TLR_E_PNIO_CMCTL_PACKET_OUT_OF_MEMORY MessageText: Insufficient memory to create a packet in CMCTL task. TLR_E_PNIO_CMCTL_PACKET_SEND_FAILED UDINT 16#C00A0018 MessageId: TLR_E_PNIO_CMCTL_PACKET_SEND_FAILED MessageText: Error while sending a packet to another task in CMCTL. TLR_E_PNIO_CMCTL_CONN_REQ_LEN_INVALID UDINT 16#C00A0019 MessageId: TLR_E_PNIO_CMCTL_CONN_REQ_LEN_INVALID MessageText: The length of the Connect-Packet in CMCTL_Connect_req() is invalid. TLR_E_PNIO_CMCTL_NAME_LEN_INVALID UDINT 16#C00A001A MessageId: TLR_E_PNIO_CMCTL_NAME_LEN_INVALID MessageText: The length of the name for IO-Device does not match to the name in CMCTL_Connect_req(). TLR_E_PNIO_CMCTL_BLKNUM_UNEXPECTED UDINT 16#C00A001B MessageId: TLR_E_PNIO_CMCTL_BLKNUM_UNEXPECTED MessageText: The Connect-Confirmation contains an incorrect amount of blocks. TLR_E_PNIO_CMCTL_BLKNUM_UNEXPECTED_MEMORY_FAULT UDINT 16#C00A001C MessageId: TLR_E_PNIO_CMCTL_BLKNUM_UNEXPECTED_MEMORY_FAULT MessageText: The Connect-Confirmation contains an incorrect amount of blocks but may be received correctly in RPC-layer. CMCTL protocol-machine has not reserved enough memory for the whole confirmation. TLR_E_PNIO_CMCTL_BLKTYPE_UNEXPECTED UDINT 16#C00A0020 MessageId: TLR_E_PNIO_CMCTL_BLKTYPE_UNEXPECTED MessageText: The connect-confirmation contains an unexpected block. TLR_E_PNIO_CMCTL_BLKTYPE_UNEXPECTED_INIT UDINT 16#C00A0021 MessageId: TLR_E_PNIO_CMCTL_BLKTYPE_UNEXPECTED_INIT MessageText: CMCTL_Connect_req() expected an INIT-block that is missing. TLR_E_PNIO_CMCTL_BLKTYPE_UNEXPECTED_IODW_REQ UDINT 16#C00A0022 MessageId: TLR_E_PNIO_CMCTL_BLKTYPE_UNEXPECTED_IODW_REQ MessageText: CMCTL_RMWrite_req() expected a WriteReq-block that is missing. TLR_E_PNIO_CMCTL_BLKTYPE_UNEXPECTED_IODW_DATA UDINT 16#C00A0023 MessageId: TLR_E_PNIO_CMCTL_BLKTYPE_UNEXPECTED_IODW_DATA MessageText: CMCTL_RMWrite_req() expected a WriteData-block that is missing. TLR_E_PNIO_CMCTL_BLKLEN_INVALID_INIT UDINT 16#C00A0030 MessageId: TLR_E_PNIO_CMCTL_BLKLEN_INVALID_INIT MessageText: INIT-block length for CMCTL_Connect_req() is invalid. TLR_E_PNIO_CMCTL_BLKLEN_INVALID_IODW_REQ UDINT 16#C00A0031 MessageId: TLR_E_PNIO_CMCTL_BLKLEN_INVALID_IODW_REQ MessageText: WriteReq-block’s length for CMCTL_RMWrite_req() is invalid. TLR_E_PNIO_CMCTL_BLKLEN_INVALID_IODW_DATA UDINT 16#C00A0032 MessageId: TLR_E_PNIO_CMCTL_BLKLEN_INVALID_IODW_DATA MessageText: WriteData-block’s length for CMCTL_RMWrite_req() is invalid. TLR_E_PNIO_CMCTL_INVALID_PM_INDEX UDINT 16#C00A0040 MessageId: TLR_E_PNIO_CMCTL_INVALID_PM_INDEX MessageText: The index of CMCTL protocol-machine is invalid. TLR_E_PNIO_CMCTL_INVALID_PM UDINT 16#C00A0041 MessageId: TLR_E_PNIO_CMCTL_INVALID_PM MessageText: The CMCTL protocol-machine corresponding to index is invalid. TLR_E_PNIO_CMCTL_INVALID_CMCTL_HANDLE UDINT 16#C00A0042 MessageId: TLR_E_PNIO_CMCTL_INVALID_CMCTL_HANDLE MessageText: The handle to CMCTL protocol-machine is invalid. TLR_E_PNIO_CMCTL_DEVICE_NOT_RESPONDING UDINT 16#C00A0050 MessageId: TLR_E_PNIO_CMCTL_DEVICE_NOT_RESPONDING MessageText: The IO-Device which shall be connected does not answer. TLR_E_PNIO_CMCTL_DUPLICATE_DEVICE_NAME_DETECTED UDINT 16#C00A0051 MessageId: TLR_E_PNIO_CMCTL_DUPLICATE_DEVICE_NAME_DETECTED MessageText: More than one IO-Device with the specified NameOfStation exists; a connection can not be established. TLR_E_PNIO_CMCTL_DEVICE_IP_ADDRESS_ALREADY_IN_USE UDINT 16#C00A0052 MessageId: TLR_E_PNIO_CMCTL_DEVICE_IP_ADDRESS_ALREADY_IN_USE MessageText: The IP-address the controller shall use for the IO-Device is already in use by another network device; a connection can not be established. TLR_E_PNIO_CMCTL_RPC_CONNECT_FAILED UDINT 16#C00A0060 MessageId: TLR_E_PNIO_CMCTL_RPC_CONNECT_FAILED MessageText: The Connect-Response of IO-Device contained an error code; a connection could not be established. TLR_E_PNIO_CMCTL_RPC_WRITE_PARAM_FAILED UDINT 16#C00A0061 MessageId: TLR_E_PNIO_CMCTL_RPC_WRITE_PARAM_FAILED MessageText: The Write_Param-Response of IO-Device contained an error code; a connection could not be established. TLR_E_PNIO_CMCTL_RPC_WRITE_FAILED UDINT 16#C00A0062 MessageId: TLR_E_PNIO_CMCTL_RPC_WRITE_FAILED MessageText: The Write-Response of IO-Device contained an error code. TLR_E_PNIO_CMCTL_RPC_READ_FAILED UDINT 16#C00A0063 MessageId: TLR_E_PNIO_CMCTL_RPC_READ_FAILED MessageText: The Read-Response of IO-Device contained an error code. TLR_E_PNIO_CMCTL_AR_BLOCKTYPE UDINT 16#C00A0070 CMCTL AR MessageId: TLR_E_PNIO_CMCTL_AR_BLOCKTYPE MessageText: The expected configuration block for AR in CMCTL_RMConnect_req_LoadAr() is missing. TLR_E_PNIO_CMCTL_AR_BLOCKLEN UDINT 16#C00A0071 MessageId: TLR_E_PNIO_CMCTL_AR_BLOCKLEN MessageText: The expected configuration block for AR in CMCTL_RMConnect_req_LoadAr() has an invalid length. TLR_E_PNIO_CMCTL_AR_TYPE UDINT 16#C00A0072 MessageId: TLR_E_PNIO_CMCTL_AR_TYPE MessageText: The configuration block for AR in CMCTL_RMConnect_req_LoadAr() has an invalid type. TLR_E_PNIO_CMCTL_AR_UUID UDINT 16#C00A0073 MessageId: TLR_E_PNIO_CMCTL_AR_UUID MessageText: The configuration block for AR in CMCTL_RMConnect_req_LoadAr() has an invalid UUID. TLR_E_PNIO_CMCTL_AR_PROPERTY UDINT 16#C00A0074 MessageId: TLR_E_PNIO_CMCTL_AR_PROPERTY MessageText: The configuration block for AR in CMCTL_RMConnect_req_LoadAr() has an invalid network properties value. TLR_E_PNIO_CMCTL_AR_REF_UNEXPECTED UDINT 16#C00A0075 MessageId: TLR_E_PNIO_CMCTL_AR_REF_UNEXPECTED MessageText: The AR-Reference for CMCTL protocol-machine is invalid. TLR_E_PNIO_CMCTL_AR_UUID_COMP_FAILED UDINT 16#C00A0076 MessageId: TLR_E_PNIO_CMCTL_AR_UUID_COMP_FAILED MessageText: The UUID inside IO-Device’s Connect-Confirmation is incorrect. TLR_E_PNIO_CMCTL_AR_KEY_COMP_FAILED UDINT 16#C00A0077 MessageId: TLR_E_PNIO_CMCTL_AR_KEY_COMP_FAILED MessageText: The session-key inside IO-Device’s Connect-Confirmation is incorrect. TLR_E_PNIO_CMCTL_AR_MAC_COMP_FAILED UDINT 16#C00A0078 MessageId: TLR_E_PNIO_CMCTL_AR_MAC_COMP_FAILED MessageText: The MAC-address of IO-Device is incorrect. TLR_E_PNIO_CMCTL_ALCR_BLOCKTYPE UDINT 16#C00A0080 CMCTL ALCR MessageId: TLR_E_PNIO_CMCTL_ALCR_BLOCKTYPE MessageText: The expected configuration block for Alarm-CR in CMCTL_RMConnect_req_LoadAlcr() is missing. TLR_E_PNIO_CMCTL_ALCR_BLOCKLEN UDINT 16#C00A0081 MessageId: TLR_E_PNIO_CMCTL_ALCR_BLOCKLEN MessageText: The expected configuration block for Alarm-CR in CMCTL_RMConnect_req_LoadAlcr() has an invalid length. TLR_E_PNIO_CMCTL_ALCR_TYPE UDINT 16#C00A0082 MessageId: TLR_E_PNIO_CMCTL_ALCR_TYPE MessageText: The configuration block for Alarm-CR in CMCTL_RMConnect_req_LoadAlcr() has an invalid type. TLR_E_PNIO_CMCTL_ALCR_PROPERTY UDINT 16#C00A0083 MessageId: TLR_E_PNIO_CMCTL_ALCR_PROPERTY MessageText: The configuration block for Alarm-CR in CMCTL_RMConnect_req_LoadAlcr() has an invalid network properties value. TLR_E_PNIO_CMCTL_ALCR_RTA_FACTOR UDINT 16#C00A0084 MessageId: TLR_E_PNIO_CMCTL_ALCR_RTA_FACTOR MessageText: The configuration block for Alarm-CR in CMCTL_RMConnect_req_LoadAlcr() has an invalid RTA-factor. TLR_E_PNIO_CMCTL_ALCR_RTA_RETRY UDINT 16#C00A0085 MessageId: TLR_E_PNIO_CMCTL_ALCR_RTA_RETRY MessageText: The configuration block for Alarm-CR in CMCTL_RMConnect_req_LoadAlcr() has an invalid value for RTA-retry. TLR_E_PNIO_CMCTL_IOCR_BLOCKLEN UDINT 16#C00A0090 CMCTL IOCR MessageId: TLR_E_PNIO_CMCTL_IOCR_BLOCKLEN MessageText: The expected configuration block for IOCR in CMCTL_RMConnect_req_LoadIocr() has an invalid length. TLR_E_PNIO_CMCTL_IOCR_TYPE_UNSUPPORTED UDINT 16#C00A0091 MessageId: TLR_E_PNIO_CMCTL_IOCR_TYPE_UNSUPPORTED MessageText: The type of IOCR is unsupported. TLR_E_PNIO_CMCTL_IOCR_TYPE_UNKNOWN UDINT 16#C00A0092 MessageId: TLR_E_PNIO_CMCTL_IOCR_TYPE_UNKNOWN MessageText: The type of IOCR is unknown. TLR_E_PNIO_CMCTL_IOCR_RTCCLASS_UNSUPPORTED UDINT 16#C00A0093 MessageId: TLR_E_PNIO_CMCTL_IOCR_RTCCLASS_UNSUPPORTED MessageText: The RTC-class is unsupported. TLR_E_PNIO_CMCTL_IOCR_RTCCLASS_UNKNOWN UDINT 16#C00A0094 MessageId: TLR_E_PNIO_CMCTL_IOCR_RTCCLASS_UNKNOWN MessageText: The RTC-class is unknown. TLR_E_PNIO_CMCTL_IOCR_IFTYPE_UNSUPPORTED UDINT 16#C00A0095 MessageId: TLR_E_PNIO_CMCTL_IOCR_IFTYPE_UNSUPPORTED MessageText: The expected configuration block for IOCR in CMCTL_RMConnect_req_LoadIocr() has an unsupported interface-type. TLR_E_PNIO_CMCTL_IOCR_SCSYNC_UNSUPPORTED UDINT 16#C00A0096 MessageId: TLR_E_PNIO_CMCTL_IOCR_SCSYNC_UNSUPPORTED MessageText: The expected configuration block for IOCR in CMCTL_RMConnect_req_LoadIocr() has an unsupported value for SendClock. TLR_E_PNIO_CMCTL_IOCR_ADDRESS_UNSUPPORTED UDINT 16#C00A0097 MessageId: TLR_E_PNIO_CMCTL_IOCR_ADDRESS_UNSUPPORTED MessageText: The expected configuration block for IOCR in CMCTL_RMConnect_req_LoadIocr() has an unsupported Address-Resolution. TLR_E_PNIO_CMCTL_IOCR_REDUNDANCY_UNSUPPORTED UDINT 16#C00A0098 MessageId: TLR_E_PNIO_CMCTL_IOCR_REDUNDANCY_UNSUPPORTED MessageText: The expected configuration block for IOCR in CMCTL_RMConnect_req_LoadIocr() has an unsupported Media-Redundancy. TLR_E_PNIO_CMCTL_IOCR_REFERENCE UDINT 16#C00A0099 MessageId: TLR_E_PNIO_CMCTL_IOCR_REFERENCE MessageText: No IOCR could be found or created. TLR_E_PNIO_CMCTL_IOCR_OBJECT_IOD UDINT 16#C00A009A MessageId: TLR_E_PNIO_CMCTL_IOCR_OBJECT_IOD MessageText: The expected configuration block for IOCR in CMCTL_RMConnect_req_LoadIocr() does not contain any IO-Data. TLR_E_PNIO_CMCTL_IOCR_OBJECT_IOS UDINT 16#C00A009B MessageId: TLR_E_PNIO_CMCTL_IOCR_OBJECT_IOS MessageText: The expected configuration block for IOCR in CMCTL_RMConnect_req_LoadIocr() does not contain any IO-Status. TLR_E_PNIO_CMCTL_IOCR_API UDINT 16#C00A009C MessageId: TLR_E_PNIO_CMCTL_IOCR_API MessageText: The expected configuration block for IOCR in CMCTL_RMConnect_req_LoadIocr() does not contain any API. TLR_E_PNIO_CMCTL_EXPS_BLOCKLEN UDINT 16#C00A00A0 CMCTL EXPS MessageId: TLR_E_PNIO_CMCTL_EXPS_BLOCKLEN MessageText: The expected configuration block for Expected-Submodules in CMCTL_RMConnect_req_LoadExps() has an invalid length. TLR_E_PNIO_CMCTL_EXPS_API UDINT 16#C00A00A1 MessageId: TLR_E_PNIO_CMCTL_EXPS_API MessageText: The expected configuration block for Expected-Submodules in CMCTL_RMConnect_req_LoadExps() does not contain any API. TLR_E_PNIO_CMCTL_EXPS_SUBMODULE UDINT 16#C00A00A2 MessageId: TLR_E_PNIO_CMCTL_EXPS_SUBMODULE MessageText: The expected configuration block for Expected-Submodules in CMCTL_RMConnect_req_LoadExps() does not contain any submodules. TLR_E_PNIO_CMCTL_EXPS_DATADESCRIPTION UDINT 16#C00A00A3 MessageId: TLR_E_PNIO_CMCTL_EXPS_DATADESCRIPTION MessageText: The expected configuration block for Expected-Submodules in CMCTL_RMConnect_req_LoadExps() does not contain the expected amount of data-descriptions. TLR_E_PNIO_EDD_PROCESS_END UDINT 16#C00E0001 TLR_E_PNIO_EDD_PARAM_INVALID_EDD UDINT 16#C00E0002 MessageId: TLR_E_PNIO_EDD_PARAM_INVALID_EDD MessageText: Invalid parameter for EDD_Scheduler_Start_req(). TLR_E_PNIO_ACP_PHASE_OUT_OF_MEMORY UDINT 16#C0110010 TLR_E_PNIO_ACP_PHASE_REDUCTION_RATIO UDINT 16#C0110011 MessageId: TLR_E_PNIO_ACP_PHASE_REDUCTION_RATIO MessageText: Invalid reduction-ratio (uiMaxRatio) in ACP_PhaseInit(). TLR_E_PNIO_ACP_PHASE_SEND_CLOCK_FACTOR UDINT 16#C0110012 MessageId: TLR_E_PNIO_ACP_PHASE_SEND_CLOCK_FACTOR MessageText: Invalid sendClock-factor (uiScFact) in ACP_PhaseInit(). TLR_E_PNIO_ACP_PHASE_FRAME_RESOURCES UDINT 16#C0110013 MessageId: TLR_E_PNIO_ACP_PHASE_FRAME_RESOURCES MessageText: Invalid parameter (uiMaxFrame) in ACP_PhaseInit(). TLR_E_PNIO_ACP_PACKET_SEND_FAILED UDINT 16#C0110014 MessageId: TLR_E_PNIO_ACP_PACKET_SEND_FAILED MessageText: Error sending a packet to another task in ACP task. TLR_E_PNIO_ALARM_PARAM_INVALID_INIT UDINT 16#C0110020 ALARM MessageId: TLR_E_PNIO_ALARM_PARAM_INVALID_INIT MessageText: Invalid parameter “uiMaxAlpm” in Alarm_ResourceInit(). TLR_E_PNIO_ALARM_RESOURCE_OUT_OF_MEMORY UDINT 16#C0110021 MessageId: TLR_E_PNIO_ALARM_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory in Alarm_ResourceInit(). TLR_E_PNIO_ALPMR_PRIORITY_INVALID UDINT 16#C0110030 ALPMR MessageId: TLR_E_PNIO_ALPMR_PRIORITY_INVALID MessageText: Invalid alarm priority in request packet of ALPMR_AlarmAck_req(). TLR_E_PNIO_ALPMR_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0110031 MessageId: TLR_E_PNIO_ALPMR_RESOURCE_LIMIT_EXCEEDED MessageText: The requested number of ALPMR protocol machines exceedes the highest possible number in ALPMR_Init_req(). TLR_E_PNIO_ALPMR_RESOURCE_OUT_OF_MEMORY UDINT 16#C0110032 MessageId: TLR_E_PNIO_ALPMR_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory in ALPMR_Init_req(). TLR_E_PNIO_ALPMR_HANDLE_INVALID UDINT 16#C0110033 MessageId: TLR_E_PNIO_ALPMR_HANDLE_INVALID MessageText: The ALPMR protocol-machine corresponding to the index in request packet is invalid. TLR_E_PNIO_ALPMR_STATE_INVALID UDINT 16#C0110034 MessageId: TLR_E_PNIO_ALPMR_STATE_INVALID MessageText: The ALPMR protocol-machine state is invalid for the current request. TLR_E_PNIO_ALPMR_PACKET_SEND_FAILED UDINT 16#C0110035 MessageId: TLR_E_PNIO_ALPMR_PACKET_SEND_FAILED MessageText: Sending an Alarm-Indication-packet to another task failed in ALPMR. TLR_E_PNIO_ALPMR_PACKET_OUT_OF_MEMORY UDINT 16#C0110036 MessageId: TLR_E_PNIO_ALPMR_PACKET_OUT_OF_MEMORY MessageText: Creating an Alarm-Indication-packet to be send to another task failed due to insufficient memory. TLR_E_PNIO_ALPMR_RESOURCE_INDEX_INVALID UDINT 16#C0110037 MessageId: TLR_E_PNIO_ALPMR_RESOURCE_INDEX_INVALID MessageText: The index of ALPMR’s protocol machine is invalid. TLR_E_PNIO_APMR_PARAM_INVALID_INIT UDINT 16#C0110040 APMR MessageId: TLR_E_PNIO_APMR_PARAM_INVALID_INIT MessageText: The parameter uiMaxApmr (maximum number of parallel APMR protocol-machines) in APMR_ResourceInit() is invalid. TLR_E_PNIO_APMR_RESOURCE_OUT_OF_MEMORY UDINT 16#C0110041 MessageId: TLR_E_PNIO_APMR_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory in APMR_ResourceInit() to create the APMR protocol machines. TLR_E_PNIO_APMR_HANDLE_INVALID UDINT 16#C0110042 MessageId: TLR_E_PNIO_APMR_HANDLE_INVALID MessageText: The APMR protocol machine or its index is invalid. TLR_E_PNIO_APMR_STATE_INVALID UDINT 16#C0110043 MessageId: TLR_E_PNIO_APMR_STATE_INVALID MessageText: The state of APMR protocol machine is invalid for current request. TLR_E_PNIO_APMR_FRAME_SEND_FAILED UDINT 16#C0110044 MessageId: TLR_E_PNIO_APMR_FRAME_SEND_FAILED MessageText: Sending an ACK or NAK in response to a received Alarm-PDU failed. TLR_E_PNIO_APMS_PARAM_INVALID_INIT UDINT 16#C0110050 APMS MessageId: TLR_E_PNIO_APMS_PARAM_INVALID_INIT MessageText: The parameter uiMaxApms (maximum number of parallel APMS protocol-machines) in APMS_ResourceInit() is invalid. TLR_E_PNIO_APMS_RESOURCE_OUT_OF_MEMORY UDINT 16#C0110051 MessageId: TLR_E_PNIO_APMS_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory in APMS_ResourceInit() to create the APMS protocol machines. TLR_E_PNIO_APMS_HANDLE_INVALID UDINT 16#C0110052 MessageId: TLR_E_PNIO_APMS_HANDLE_INVALID MessageText: The APMS protocol machine or its index is invalid. TLR_E_PNIO_APMS_STATE_INVALID UDINT 16#C0110053 MessageId: TLR_E_PNIO_APMS_STATE_INVALID MessageText: The state of APMS protocol machine is invalid for current request. TLR_E_PNIO_APMS_FRAME_OUT_OF_MEMORY UDINT 16#C0110054 MessageId: TLR_E_PNIO_APMS_FRAME_OUT_OF_MEMORY MessageText: APMS was not able to get an Edd_FrameBuffer for sending a packet. TLR_E_PNIO_APMS_FRAME_SEND_FAILED UDINT 16#C0110055 MessageId: TLR_E_PNIO_APMS_FRAME_SEND_FAILED MessageText: An error occurred while APMS was trying to send an Edd_Frame. TLR_E_PNIO_APMS_TIMER_CREATE_FAILED UDINT 16#C0110056 MessageId: TLR_E_PNIO_APMS_TIMER_CREATE_FAILED MessageText: APMS_Activate_req() was not able to create a TLR-Timer. TLR_E_PNIO_APMS_TIMER_OUT_OF_MEMORY UDINT 16#C0110057 MessageId: TLR_E_PNIO_APMS_TIMER_OUT_OF_MEMORY MessageText: Insufficient memory for APMS_Send_req_Data() to allocate a timer-indication packet. TLR_E_PNIO_CPM_PARAM_INVALID_INIT UDINT 16#C0110060 CPM MessageId: TLR_E_PNIO_CPM_PARAM_INVALID_INIT MessageText: The parameter uiMaxCpmRtc1 and/or uiMaxCpmRtc2 of CPM_ResourceInit() is invalid. TLR_E_PNIO_CPM_PARAM_INVALID_CLASS UDINT 16#C0110061 MessageId: TLR_E_PNIO_CPM_PARAM_INVALID_CLASS MessageText: The requested RTC-class is invalid in CPM_Init_req(). TLR_E_PNIO_CPM_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0110062 MessageId: TLR_E_PNIO_CPM_RESOURCE_LIMIT_EXCEEDED MessageText: The requested amount of CPM protocol machines is higher than the highest possible value. TLR_E_PNIO_CPM_RESOURCE_OUT_OF_MEMORY UDINT 16#C0110063 MessageId: TLR_E_PNIO_CPM_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory for current request in CPM. TLR_E_PNIO_CPM_HANDLE_INVALID UDINT 16#C0110064 MessageId: TLR_E_PNIO_CPM_HANDLE_INVALID MessageText: The handle to CPM protocol machine in invalid. TLR_E_PNIO_CPM_STATE_INVALID UDINT 16#C0110065 MessageId: TLR_E_PNIO_CPM_STATE_INVALID MessageText: The state of CPM protocol machine is incorrect for current request. TLR_E_PNIO_CPM_PHASE_LIMIT_EXCEEDED UDINT 16#C0110066 MessageId: TLR_E_PNIO_CPM_PHASE_LIMIT_EXCEEDED MessageText: Invalid phase found in Init-request-packet in CPM_Init_req() or in ACP_PhaseCpmAdd_req() or ACP_PhaseCpmRemove_req(). TLR_E_PNIO_CPM_SEND_CLOCK_LIMIT_EXCEEDED UDINT 16#C0110067 MessageId: TLR_E_PNIO_CPM_SEND_CLOCK_LIMIT_EXCEEDED MessageText: The SendClock-factor in Init-request-packet to CPM does not match the one in ACP_Tasks’ resources. TLR_E_PNIO_CPM_DATALEN_LIMIT_EXCEEDED UDINT 16#C0110069 MessageId: TLR_E_PNIO_CPM_DATALEN_LIMIT_EXCEEDED MessageText: Packet size to receive is to big. Error is detected in CPM_Init_req(). TLR_E_PNIO_CPM_PACKET_SEND_FAILED UDINT 16#C011006A MessageId: TLR_E_PNIO_CPM_PACKET_SEND_FAILED MessageText: Error while sending a packet to another task in CPM. TLR_E_PNIO_PPM_PARAM_INVALID_INIT UDINT 16#C0110080 PPM MessageId: TLR_E_PNIO_PPM_PARAM_INVALID_INIT MessageText: The parameter “uiMaxPPMRtc1” and/or “uiMaxPPMRtc2” of PPM_ResourceInit() is invalid. TLR_E_PNIO_PPM_PARAM_INVALID_CLASS UDINT 16#C0110081 MessageId: TLR_E_PNIO_PPM_PARAM_INVALID_CLASS MessageText: The requested RTC-class is invalid in PPM_Init_req(). TLR_E_PNIO_PPM_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0110082 MessageId: TLR_E_PNIO_PPM_RESOURCE_LIMIT_EXCEEDED MessageText: The requested amount of PPM protocol machines is higher than the highest possible value. TLR_E_PNIO_PPM_RESOURCE_OUT_OF_MEMORY UDINT 16#C0110083 MessageId: TLR_E_PNIO_PPM_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory for current request in PPM. TLR_E_PNIO_PPM_HANDLE_INVALID UDINT 16#C0110084 MessageId: TLR_E_PNIO_PPM_HANDLE_INVALID MessageText: The handle to PPM protocol machine in invalid. TLR_E_PNIO_PPM_STATE_INVALID UDINT 16#C0110085 MessageId: TLR_E_PNIO_PPM_STATE_INVALID MessageText: The state of PPM protocol machine is incorrect for current request. TLR_E_PNIO_PPM_PHASE_LIMIT_EXCEEDED UDINT 16#C0110086 MessageId: TLR_E_PNIO_PPM_PHASE_LIMIT_EXCEEDED MessageText: Invalid phase found in Init-request-packet in PPM_Init_req() or in ACP_PhasePPMAdd_req() or ACP_PhasePPMRemove_req(). TLR_E_PNIO_PPM_SEND_CLOCK_LIMIT_EXCEEDED UDINT 16#C0110087 MessageId: TLR_E_PNIO_PPM_SEND_CLOCK_LIMIT_EXCEEDED MessageText: The SendClock-factor in PPMs Init-request-packet does not match the one in ACP_Tasks’ resources. TLR_E_PNIO_PPM_DATALEN_LIMIT_EXCEEDED UDINT 16#C0110089 MessageId: TLR_E_PNIO_PPM_DATALEN_LIMIT_EXCEEDED MessageText: Packet size to send is to big. Error is detected in PPM_Init_req(). TLR_E_PNIO_DCP_PARAM_INVALID_EDD UDINT 16#C012000A TLR_E_PNIO_DCPMCR_INIT_PARAM_INVALID UDINT 16#C0120010 DCPMCR MessageId: TLR_E_PNIO_DCPMCR_INIT_PARAM_INVALID MessageText: Invalid parameter (uiMaxMcr) in DCPMCR_ResourceInit(). TLR_E_PNIO_DCPMCR_INIT_OUT_OF_MEMORY UDINT 16#C0120011 MessageId: TLR_E_PNIO_DCPMCR_INIT_OUT_OF_MEMORY MessageText: Insufficient memory to initialize DCPMCR protocol machines in DCPMCR_ResourceInit(). TLR_E_PNIO_DCPMCR_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0120012 MessageId: TLR_E_PNIO_DCPMCR_RESOURCE_LIMIT_EXCEEDED MessageText: The index of DCPMCR’s protocol machine is invalid. TLR_E_PNIO_DCPMCR_RESOURCE_OUT_OF_MEMORY UDINT 16#C0120013 MessageId: TLR_E_PNIO_DCPMCR_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory for request in DCPMCR_Activate_req(). TLR_E_PNIO_DCPMCR_RESOURCE_STATE_INVALID UDINT 16#C0120014 MessageId: TLR_E_PNIO_DCPMCR_RESOURCE_STATE_INVALID MessageText: The state of DCPMCR protocol machine is incorrect for current request. TLR_E_PNIO_DCPMCR_RESOURCE_HANDLE_INVALID UDINT 16#C0120015 MessageId: TLR_E_PNIO_DCPMCR_RESOURCE_HANDLE_INVALID MessageText: The handle to DCPMCR protocol machine in invalid. TLR_E_PNIO_DCPMCR_TIMER_CREATE_FAILED UDINT 16#C0120016 MessageId: TLR_E_PNIO_DCPMCR_TIMER_CREATE_FAILED MessageText: DCPMCR_Activate_req() was unable to create a TLR-timer. TLR_E_PNIO_DCPMCR_TIMER_OUT_OF_MEMORY UDINT 16#C0120017 MessageId: TLR_E_PNIO_DCPMCR_TIMER_OUT_OF_MEMORY MessageText: Insufficient memory for DCPMCR_Identify_ind() to allocate a timer-indication packet. TLR_E_PNIO_DCPMCR_PACKET_OUT_OF_MEMORY UDINT 16#C0120018 MessageId: TLR_E_PNIO_DCPMCR_PACKET_OUT_OF_MEMORY MessageText: Insufficient memory to allocate a packet to be send to another task in DCPMCR. TLR_E_PNIO_DCPMCR_PACKET_SEND_FAILED UDINT 16#C0120019 MessageId: TLR_E_PNIO_DCPMCR_PACKET_SEND_FAILED MessageText: Error while sending a packet to another task in DCPMCR. TLR_E_PNIO_DCPMCR_FRAME_OUT_OF_MEMORY UDINT 16#C012001A MessageId: TLR_E_PNIO_DCPMCR_FRAME_OUT_OF_MEMORY MessageText: DCPMCR was not able to get an Edd_FrameBuffer for sending a packet. TLR_E_PNIO_DCPMCR_FRAME_SEND_FAILED UDINT 16#C012001B MessageId: TLR_E_PNIO_DCPMCR_FRAME_SEND_FAILED MessageText: An error occurred while DCPMCR was trying to send an Edd_Frame. TLR_E_PNIO_DCPMCR_WAIT_ACK UDINT 16#C012001C MessageId: TLR_E_PNIO_DCPMCR_WAIT_ACK MessageText: DCPMCR could not be closed because it is still waiting for an ACK. TLR_E_PNIO_DCPMCS_INIT_PARAM_INVALID UDINT 16#C0120100 DCPMCS MessageId: TLR_E_PNIO_DCPMCS_INIT_PARAM_INVALID MessageText: Invalid parameter (uiMaxMcs) in DCPMCS_ResourceInit(). TLR_E_PNIO_DCPMCS_INIT_OUT_OF_MEMORY UDINT 16#C0120101 MessageId: TLR_E_PNIO_DCPMCS_INIT_OUT_OF_MEMORY MessageText: Insufficient memory to initialize DCPMCS protocol machines in DCPMCS_ResourceInit(). TLR_E_PNIO_DCPMCS_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0120102 MessageId: TLR_E_PNIO_DCPMCS_RESOURCE_LIMIT_EXCEEDED MessageText: There are too many outstanding DCPMCS requests. New requests will not be accepted. TLR_E_PNIO_DCPMCS_RESOURCE_OUT_OF_MEMORY UDINT 16#C0120103 MessageId: TLR_E_PNIO_DCPMCS_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory for request in DCPMCS_Activate_req(). TLR_E_PNIO_DCPMCS_RESOURCE_STATE_INVALID UDINT 16#C0120104 MessageId: TLR_E_PNIO_DCPMCS_RESOURCE_STATE_INVALID MessageText: The state of DCPMCS protocol machine is incorrect for current request. TLR_E_PNIO_DCPMCS_RESOURCE_HANDLE_INVALID UDINT 16#C0120105 MessageId: TLR_E_PNIO_DCPMCS_RESOURCE_HANDLE_INVALID MessageText: The handle to DCPMCS protocol machine in invalid. TLR_E_PNIO_DCPMCS_TIMER_CREATE_FAILED UDINT 16#C0120106 MessageId: TLR_E_PNIO_DCPMCS_TIMER_CREATE_FAILED MessageText: DCPMCS_Activate_req() was unable to create a TLR-timer. TLR_E_PNIO_DCPMCS_TIMER_OUT_OF_MEMORY UDINT 16#C0120107 MessageId: TLR_E_PNIO_DCPMCS_TIMER_OUT_OF_MEMORY MessageText: Insufficient memory for DCPMCS_Identify_req() to allocate a timer-indication packet. TLR_E_PNIO_DCPMCS_PACKET_OUT_OF_MEMORY UDINT 16#C0120108 MessageId: TLR_E_PNIO_DCPMCS_PACKET_OUT_OF_MEMORY MessageText: Insufficient memory to allocate a packet to be send to another task in DCPMCS. TLR_E_PNIO_DCPMCS_PACKET_SEND_FAILED UDINT 16#C0120109 MessageId: TLR_E_PNIO_DCPMCS_PACKET_SEND_FAILED MessageText: Error while sending a packet to another task in DCPMCS. TLR_E_PNIO_DCPMCS_FRAME_OUT_OF_MEMORY UDINT 16#C012010A MessageId: TLR_E_PNIO_DCPMCS_FRAME_OUT_OF_MEMORY MessageText: DCPMCS was not able to get an Edd_FrameBuffer for sending a packet. TLR_E_PNIO_DCPMCS_FRAME_SEND_FAILED UDINT 16#C012010B MessageId: TLR_E_PNIO_DCPMCS_FRAME_SEND_FAILED MessageText: An error occurred while DCPMCS was trying to send an Edd_Frame. TLR_E_PNIO_DCPUCR_INIT_PARAM_INVALID UDINT 16#C0120200 DCPUCR MessageId: TLR_E_PNIO_DCPUCR_INIT_PARAM_INVALID MessageText: Invalid parameter (uiMaxUcr) in DCPUCR_ResourceInit(). TLR_E_PNIO_DCPUCR_INIT_OUT_OF_MEMORY UDINT 16#C0120201 MessageId: TLR_E_PNIO_DCPUCR_INIT_OUT_OF_MEMORY MessageText: Insufficient memory to initialize DCPUCR protocol machines in DCPUCR_ResourceInit(). TLR_E_PNIO_DCPUCR_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0120202 MessageId: TLR_E_PNIO_DCPUCR_RESOURCE_LIMIT_EXCEEDED MessageText: The index of DCPUCR’s protocol machine is invalid. TLR_E_PNIO_DCPUCR_RESOURCE_OUT_OF_MEMORY UDINT 16#C0120203 MessageId: TLR_E_PNIO_DCPUCR_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory for request in DCPUCR_Activate_req(). TLR_E_PNIO_DCPUCR_RESOURCE_STATE_INVALID UDINT 16#C0120204 MessageId: TLR_E_PNIO_DCPUCR_RESOURCE_STATE_INVALID MessageText: The state of DCPUCR protocol machine is incorrect for current request. TLR_E_PNIO_DCPUCR_RESOURCE_HANDLE_INVALID UDINT 16#C0120205 MessageId: TLR_E_PNIO_DCPUCR_RESOURCE_HANDLE_INVALID MessageText: The handle to DCPUCR protocol machine in invalid. TLR_E_PNIO_DCPUCR_TIMER_CREATE_FAILED UDINT 16#C0120206 MessageId: TLR_E_PNIO_DCPUCR_TIMER_CREATE_FAILED MessageText: DCPUCR_Activate_req() was unable to create a TLR-timer. TLR_E_PNIO_DCPUCR_TIMER_OUT_OF_MEMORY UDINT 16#C0120207 MessageId: TLR_E_PNIO_DCPUCR_TIMER_OUT_OF_MEMORY MessageText: Insufficient memory to allocate a timer-indication packet. TLR_E_PNIO_DCPUCR_PACKET_OUT_OF_MEMORY UDINT 16#C0120208 MessageId: TLR_E_PNIO_DCPUCR_PACKET_OUT_OF_MEMORY MessageText: Insufficient memory to allocate a packet to be send to another task in DCPUCR. TLR_E_PNIO_DCPUCR_PACKET_SEND_FAILED UDINT 16#C0120209 MessageId: TLR_E_PNIO_DCPUCR_PACKET_SEND_FAILED MessageText: Error while sending a packet to another task in DCPUCR. TLR_E_PNIO_DCPUCR_FRAME_OUT_OF_MEMORY UDINT 16#C012020A MessageId: TLR_E_PNIO_DCPUCR_FRAME_OUT_OF_MEMORY MessageText: DCPUCR was not able to get an Edd_FrameBuffer for sending a packet. TLR_E_PNIO_DCPUCR_FRAME_SEND_FAILED UDINT 16#C012020B MessageId: TLR_E_PNIO_DCPUCR_FRAME_SEND_FAILED MessageText: An error occurred while DCPUCR was trying to send an Edd_Frame. TLR_E_PNIO_DCPUCR_SERVICE_INVALID UDINT 16#C012020C MessageId: TLR_E_PNIO_DCPUCR_SERVICE_INVALID MessageText: The DCP-command of received response does not match the outstanding request in DCPUCR. TLR_E_PNIO_DCPUCR_WAIT_ACK UDINT 16#C012020D MessageId: TLR_E_PNIO_DCPUCR_WAIT_ACK MessageText: DCPUCR could not be closed because it is still waiting for an ACK. TLR_E_PNIO_DCPUCS_INIT_PARAM_INVALID UDINT 16#C0120300 DCPUCS MessageId: TLR_E_PNIO_DCPUCS_INIT_PARAM_INVALID MessageText: Invalid parameter (uiMaxUcs) in DCPUCS_ResourceInit(). TLR_E_PNIO_DCPUCS_INIT_OUT_OF_MEMORY UDINT 16#C0120301 MessageId: TLR_E_PNIO_DCPUCS_INIT_OUT_OF_MEMORY MessageText: Insufficient memory to initialize DCPUCS protocol machines in DCPUCS_ResourceInit(). TLR_E_PNIO_DCPUCS_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0120302 MessageId: TLR_E_PNIO_DCPUCS_RESOURCE_LIMIT_EXCEEDED MessageText: There are too many outstanding DCPUCS requests. New requests will not be accepted. TLR_E_PNIO_DCPUCS_RESOURCE_OUT_OF_MEMORY UDINT 16#C0120303 MessageId: TLR_E_PNIO_DCPUCS_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory for request in DCPUCS_Activate_req(). TLR_E_PNIO_DCPUCS_RESOURCE_STATE_INVALID UDINT 16#C0120304 MessageId: TLR_E_PNIO_DCPUCS_RESOURCE_STATE_INVALID MessageText: The state of DCPUCS protocol machine is incorrect for current request. TLR_E_PNIO_DCPUCS_RESOURCE_HANDLE_INVALID UDINT 16#C0120305 MessageId: TLR_E_PNIO_DCPUCS_RESOURCE_HANDLE_INVALID MessageText: The handle to DCPUCS protocol machine in invalid. TLR_E_PNIO_DCPUCS_TIMER_CREATE_FAILED UDINT 16#C0120306 MessageId: TLR_E_PNIO_DCPUCS_TIMER_CREATE_FAILED MessageText: DCPUCS_Activate_req() was unable to create a TLR-timer. TLR_E_PNIO_DCPUCS_TIMER_OUT_OF_MEMORY UDINT 16#C0120307 MessageId: TLR_E_PNIO_DCPUCS_TIMER_OUT_OF_MEMORY MessageText: Insufficient memory for DCPUCS_DataSend_req() to allocate a timer-indication packet. TLR_E_PNIO_DCPUCS_PACKET_OUT_OF_MEMORY UDINT 16#C0120308 MessageId: TLR_E_PNIO_DCPUCS_PACKET_OUT_OF_MEMORY MessageText: Insufficient memory to allocate a packet to be send to another task in DCPUCS. TLR_E_PNIO_DCPUCS_PACKET_SEND_FAILED UDINT 16#C0120309 MessageId: TLR_E_PNIO_DCPUCS_PACKET_SEND_FAILED MessageText: Error while sending a packet to another task in DCPUCS. TLR_E_PNIO_DCPUCS_FRAME_OUT_OF_MEMORY UDINT 16#C012030A MessageId: TLR_E_PNIO_DCPUCS_FRAME_OUT_OF_MEMORY MessageText: DCPUCS was not able to get an Edd_FrameBuffer for sending a packet. TLR_E_PNIO_DCPUCS_FRAME_SEND_FAILED UDINT 16#C012030B MessageId: TLR_E_PNIO_DCPUCS_FRAME_SEND_FAILED MessageText: An error occurred while DCPUCS was trying to send an Edd_Frame. TLR_E_PNIO_DCPUCS_FRAME_TIMEOUT UDINT 16#C012030C MessageId: TLR_E_PNIO_DCPUCS_FRAME_TIMEOUT MessageText: DCPUCS did not get a response to an Edd_Frame send . TLR_E_PNIO_DCPUCS_DCP_OPTION_UNSUPPORTED UDINT 16#C0120320 MessageId: TLR_E_PNIO_DCPUCS_DCP_OPTION_UNSUPPORTED MessageText: The DCP option to set is not supported by IO-Device. TLR_E_PNIO_DCPUCS_DCP_SUBOPTION_UNSUPPORTED UDINT 16#C0120321 MessageId: TLR_E_PNIO_DCPUCS_DCP_SUBOPTION_UNSUPPORTED MessageText: The DCP suboption to set is not supported by IO-Device. TLR_E_PNIO_DCPUCS_DCP_SUBOPTION_NOT_SET UDINT 16#C0120022 MessageId: TLR_E_PNIO_DCPUCS_DCP_SUBOPTION_NOT_SET MessageText: The DCP suboption to set was not set inside IO-Device. TLR_E_PNIO_DCPUCS_DCP_RESOURCE_ERROR UDINT 16#C0120023 MessageId: TLR_E_PNIO_DCPUCS_DCP_RESOURCE_ERROR MessageText: An internal resource error occured in IO-Device while performing a DCP request. TLR_E_PNIO_DCPUCS_DCP_SET_IMPOSSIBLE_LOCAL_REASON UDINT 16#C0120024 MessageId: TLR_E_PNIO_DCPUCS_DCP_SET_IMPOSSIBLE_LOCAL_REASON MessageText: The DCP (sub)option could not be set inside IO-Device for IO-Device internal reasons. TLR_E_PNIO_DCPUCS_DCP_SET_IMPOSSIBLE_WHILE_OPERATION UDINT 16#C0120025 MessageId: TLR_E_PNIO_DCPUCS_DCP_SET_IMPOSSIBLE_WHILE_OPERATION MessageText: The DCP (sub)option could not be set inside IO-Device because IO-Device is in operation. TLR_E_PNIO_MGT_PACKET_SEND_FAILED UDINT 16#C0130001 TLR_E_PNIO_NRPM_PARAM_INVALID_INIT UDINT 16#C0130010 NRPM MessageId: TLR_E_PNIO_NRPM_PARAM_INVALID_INIT MessageText: Invalid parameter (uiMaxNrpm) in NRPM_ResourceInit(). TLR_E_PNIO_NRPM_HANDLE_INVALID UDINT 16#C0130011 MessageId: TLR_E_PNIO_NRPM_HANDLE_INVALID MessageText: The handle to NRPM protocol machine in invalid. TLR_E_PNIO_NRPM_STATE_INVALID UDINT 16#C0130012 MessageId: TLR_E_PNIO_NRPM_STATE_INVALID MessageText: The state of NRPM protocol machine is invalid. TLR_E_PNIO_NRPM_IDENTIFY_FLAG_INVALID UDINT 16#C0130013 MessageId: TLR_E_PNIO_NRPM_IDENTIFY_FLAG_INVALID MessageText: The identify-flag in NRPM_Init_req() is invalid. TLR_E_PNIO_NRPM_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0130014 MessageId: TLR_E_PNIO_NRPM_RESOURCE_LIMIT_EXCEEDED MessageText: The requested number of NRPM protocol machines exceedes the highest possible number in NRPM_Init_req(). TLR_E_PNIO_NRPM_RESOURCE_OUT_OF_MEMORY UDINT 16#C0130015 MessageId: TLR_E_PNIO_NRPM_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory in NRPM_Init_req(). TLR_E_PNIO_NRPM_PACKET_SEND_FAILED UDINT 16#C0130016 MessageId: TLR_E_PNIO_NRPM_PACKET_SEND_FAILED MessageText: Error while sending a packet to another task in NRPM. TLR_E_PNIO_NRPM_PACKET_OUT_OF_MEMORY UDINT 16#C0130017 MessageId: TLR_E_PNIO_NRPM_PACKET_OUT_OF_MEMORY MessageText: Insufficient memory to allocate a packet in NRPM. TLR_E_PNIO_NRPM_DCP_TYPE_INVALID UDINT 16#C0130018 MessageId: TLR_E_PNIO_NRPM_DCP_TYPE_INVALID MessageText: Received request with invalid type of DCP request in NRPM. TLR_E_PNIO_NRPM_NAME_OF_STATION_INVALID UDINT 16#C0130019 MessageId: TLR_E_PNIO_NRPM_NAME_OF_STATION_INVALID MessageText: The requested NameOfStation is invalid. Either it has an invalid length or it contains invalid characters. TLR_E_PNIO_NRPM_DCP_SET_ERROR UDINT 16#C013001A MessageId: TLR_E_PNIO_NRPM_DCP_SET_ERROR MessageText: The requested DCP Set operation failed. TLR_E_PNIO_NRPM_DEVICE_IP_ADDRESS_ALREADY_IN_USE UDINT 16#C013001B MessageId: TLR_E_PNIO_NRPM_DEVICE_IP_ADDRESS_ALREADY_IN_USE MessageText: The IP-address the controller shall set for the IO-Device is already in use by another network device. TLR_E_PNIO_RMPM_HANDLE_INVALID UDINT 16#C0130101 RMPM MessageId: TLR_E_PNIO_RMPM_HANDLE_INVALID MessageText: The handle to RMPM is invalid. TLR_E_PNIO_RMPM_STATE_INVALID UDINT 16#C0130102 MessageId: TLR_E_PNIO_RMPM_STATE_INVALID MessageText: The state of RMPM is invalid for current request. TLR_E_PNIO_RMPM_STATE_CLOSING UDINT 16#C0130103 MessageId: TLR_E_PNIO_RMPM_STATE_CLOSING MessageText: The state of RMPM is closed TLR_E_PNIO_RMPM_RESOURCE_LIMIT_EXCEEDED UDINT 16#C0130104 MessageId: TLR_E_PNIO_RMPM_RESOURCE_LIMIT_EXCEEDED MessageText: The number of RMPM state-machines is to high. TLR_E_PNIO_RMPM_RESOURCE_OUT_OF_MEMORY UDINT 16#C0130105 MessageId: TLR_E_PNIO_RMPM_RESOURCE_OUT_OF_MEMORY MessageText: Insufficient memory to fullfill the current request in RMPM. TLR_E_PNIO_RMPM_PACKET_SEND_FAILED UDINT 16#C0130106 MessageId: TLR_E_PNIO_RMPM_PACKET_SEND_FAILED MessageText: Error while sending a packet to another task in RMPM. TLR_E_PNIO_RMPM_PACKET_OUT_OF_MEMORY UDINT 16#C0130107 MessageId: TLR_E_PNIO_RMPM_PACKET_OUT_OF_MEMORY MessageText: Insufficient memory to allocate a packet in RMPM. TLR_E_PNIO_RMPM_ROLE_UNSUPPORTED UDINT 16#C0130108 MessageId: TLR_E_PNIO_RMPM_ROLE_UNSUPPORTED MessageText: The parameter “role” is unsupported in RMPM_Init_req_ParameterRole() . TLR_E_PNIO_RMPM_ROLE_UNKNOWN UDINT 16#C0130109 MessageId: TLR_E_PNIO_RMPM_ROLE_UNKNOWN MessageText: The parameter “role” is unknown in RMPM_Init_req_ParameterRole() . TLR_E_PNIO_RMPM_ROLE_IN_USE UDINT 16#C013010A MessageId: TLR_E_PNIO_RMPM_ROLE_IN_USE MessageText: The parameter “role” is already in use in RMPM_Init_req_ParameterRole() . TLR_E_PNIO_RMPM_CONFIG_SEQUENCE UDINT 16#C013010B MessageId: TLR_E_PNIO_RMPM_CONFIG_SEQUENCE MessageText: Incorrect sequence of configuration in RMPM_ConfigSet_req(). TLR_E_PNIO_RMPM_CONFIG_INVALID_VENDOR_ID UDINT 16#C013010C MessageId: TLR_E_PNIO_RMPM_CONFIG_INVALID_VENDOR_ID MessageText: Incorrect configuration of Vendor-ID in RMPM_ConfigSet_req(). TLR_E_PNIO_RMPM_CONFIG_INVALID_NAME UDINT 16#C013010D MessageId: TLR_E_PNIO_RMPM_CONFIG_INVALID_NAME MessageText: Incorrect name of station in RMPM_ConfigSet_req(). TLR_E_PNIO_RMPM_CONFIG_INVALID_TYPE UDINT 16#C013010E MessageId: TLR_E_PNIO_RMPM_CONFIG_INVALID_TYPE MessageText: Incorrect name of type in RMPM_ConfigSet_req(). TLR_E_PNIO_RMPM_DUPLICATE_NAME_OF_STATION UDINT 16#C0130110 MessageId: TLR_E_PNIO_RMPM_DUPLICATE_NAME_OF_STATION MessageText: The NameOfStation of IO-Controller is in use by another network device. TLR_E_PNIO_RMPM_DUPLICATE_IP UDINT 16#C0130111 MessageId: TLR_E_PNIO_RMPM_DUPLICATE_IP MessageText: The IP-address the IO-Controller shall use is in use by another network device. TLR_DIAG_E_CMCTL_TASK_RESOURCE_INIT_FAILED UDINT 16#C00AF000 TLR_DIAG_E_CMCTL_TASK_CREATE_QUE_FAILED UDINT 16#C00AF001 MessageId: TLR_DIAG_E_CMCTL_TASK_CREATE_QUE_FAILED MessageText: Failed to create message-queue for CMCTL. TLR_DIAG_E_CMCTL_TASK_CREATE_SYNC_QUE_FAILED UDINT 16#C00AF002 MessageId: TLR_DIAG_E_CMCTL_TASK_CREATE_SYNC_QUE_FAILED MessageText: Failed to create synchronous message-queue for CMCTL. TLR_DIAG_E_CMCTL_TASK_RPC_INIT_FAILED UDINT 16#C00AF003 MessageId: TLR_DIAG_E_CMCTL_TASK_RPC_INIT_FAILED MessageText: Failed to initialize CMCTL’s local RPC-ressources. TLR_DIAG_E_CMCTL_TASK_IDENT_ACP_QUE_FALIED UDINT 16#C00AF004 MessageId: TLR_DIAG_E_CMCTL_TASK_IDENT_ACP_QUE_FALIED MessageText: Failed to get handle to ACP message-queue in CMCTL. TLR_DIAG_E_CMCTL_TASK_IDENT_MGT_QUE_FALIED UDINT 16#C00AF005 MessageId: TLR_DIAG_E_CMCTL_TASK_IDENT_MGT_QUE_FALIED MessageText: Failed to get handle to MGT message-queue in CMCTL. TLR_DIAG_E_CMCTL_TASK_IDENT_RPC_QUE_FALIED UDINT 16#C00AF006 MessageId: TLR_DIAG_E_CMCTL_TASK_IDENT_RPC_QUE_FALIED MessageText: Failed to get handle to RPC message-queue in CMCTL. TLR_DIAG_E_CMCTL_TASK_IDENT_TCP_QUE_FALIED UDINT 16#C00AF007 MessageId: TLR_DIAG_E_CMCTL_TASK_IDENT_TCP_QUE_FALIED MessageText: Failed to get handle to TCP/IP message-queue in CMCTL . TLR_E_PNIO_ACP_COMMAND_INVALID UDINT 16#C011F001 TLR_DIAG_E_ACP_TASK_ACP_PHASE_INIT_FAILED UDINT 16#C011F010 MessageId: TLR_DIAG_E_ACP_TASK_ACP_PHASE_INIT_FAILED MessageText: Failed to initialize ACP Phase. TLR_DIAG_E_ACP_TASK_ALARM_INIT_FAILED UDINT 16#C011F011 MessageId: TLR_DIAG_E_ACP_TASK_ALARM_INIT_FAILED MessageText: Failed to initialize Alarm-machines. TLR_DIAG_E_ACP_TASK_APMR_INIT_FAILED UDINT 16#C011F012 MessageId: TLR_DIAG_E_ACP_TASK_APMR_INIT_FAILED MessageText: Failed to initialize APMR. TLR_DIAG_E_ACP_TASK_APMS_INIT_FAILED UDINT 16#C011F013 MessageId: TLR_DIAG_E_ACP_TASK_APMS_INIT_FAILED MessageText: Failes to initialize APMS. TLR_DIAG_E_ACP_TASK_CPM_INIT_FAILED UDINT 16#C011F014 MessageId: TLR_DIAG_E_ACP_TASK_CPM_INIT_FAILED MessageText: Failed to initialize CPM. TLR_DIAG_E_ACP_TASK_PPM_INIT_FAILED UDINT 16#C011F015 MessageId: TLR_DIAG_E_ACP_TASK_PPM_INIT_FAILED MessageText: Failed to initialize PPM. TLR_DIAG_E_ACP_TASK_CREATE_QUE_FAILED UDINT 16#C011F016 MessageId: TLR_DIAG_E_ACP_TASK_CREATE_QUE_FAILED MessageText: Failed to create message-queue for ACP. TLR_DIAG_E_ACP_TASK_IDENT_EDD_FAILED UDINT 16#C011F017 MessageId: TLR_DIAG_E_ACP_TASK_IDENT_EDD_FAILED MessageText: Failed to identify Drv_EDD. TLR_DIAG_E_ACP_TASK_IDENT_EDD_QUE_FAILED UDINT 16#C011F018 MessageId: TLR_DIAG_E_ACP_TASK_IDENT_EDD_QUE_FAILED MessageText: Failed to get handle to EDD message-queue. TLR_DIAG_E_ACP_TASK_IDENT_DCP_QUE_FAILED UDINT 16#C011F019 MessageId: TLR_DIAG_E_ACP_TASK_IDENT_DCP_QUE_FAILED MessageText: Failed to get handle to DCP message-queue. TLR_E_PNIO_EDD_COMMAND_INVALID UDINT 16#C00EF001 TLR_DIAG_E_EDD_TASK_INIT_LOCAL_FAILED UDINT 16#C00EF010 MessageId: TLR_DIAG_E_EDD_TASK_INIT_LOCAL_FAILED MessageText: Failed to initialize EDD’s local resources. TLR_E_PNIO_DCP_COMMAND_INVALID UDINT 16#C012F001 TLR_DIAG_E_DCP_TASK_UCS_RESOURCE_INIT_FAILED UDINT 16#C012F010 MessageId: TLR_DIAG_E_DCP_TASK_UCS_RESOURCE_INIT_FAILED MessageText: Failed to initialize DCPUCS. TLR_DIAG_E_DCP_TASK_UCR_RESOURCE_INIT_FAILED UDINT 16#C012F011 MessageId: TLR_DIAG_E_DCP_TASK_UCR_RESOURCE_INIT_FAILED MessageText: Failed to initialize DCPUCR. TLR_DIAG_E_DCP_TASK_MCS_RESOURCE_INIT_FAILED UDINT 16#C012F012 MessageId: TLR_DIAG_E_DCP_TASK_MCS_RESOURCE_INIT_FAILED MessageText: Failed to initialize DCPMCS. TLR_DIAG_E_DCP_TASK_MCR_RESOURCE_INIT_FAILED UDINT 16#C012F013 MessageId: TLR_DIAG_E_DCP_TASK_MCR_RESOURCE_INIT_FAILED MessageText: Failed to initialize DCPMCR. TLR_DIAG_E_DCP_TASK_CREATE_QUE_FAILED UDINT 16#C012F014 MessageId: TLR_DIAG_E_DCP_TASK_CREATE_QUE_FAILED MessageText: Failed to create message-queue for DCP task. TLR_E_PNIO_MGT_COMMAND_INVALID UDINT 16#C013F001 TLR_DIAG_E_MGT_TASK_RMPM_RESOURCE_INIT_FAILED UDINT 16#C013F010 MessageId: TLR_DIAG_E_MGT_TASK_RMPM_RESOURCE_INIT_FAILED MessageText: Failed to initialize RMPM. TLR_DIAG_E_MGT_TASK_NRPM_RESOURCE_INIT_FAILED UDINT 16#C013F011 MessageId: TLR_DIAG_E_MGT_TASK_NRPM_RESOURCE_INIT_FAILED MessageText: Failed to initialize NRPM. TLR_DIAG_E_MGT_TASK_CREATE_QUE_FAILED UDINT 16#C013F012 MessageId: TLR_DIAG_E_MGT_TASK_CREATE_QUE_FAILED MessageText: Failed to create message-queue for MGT task. TLR_DIAG_E_MGT_TASK_IDENT_TCPUDP_QUE_FAILED UDINT 16#C013F013 MessageId: TLR_DIAG_E_MGT_TASK_IDENT_TCPUDP_QUE_FAILED MessageText: Failed to get handle to TCP/IP task in MGT task. TLR_DIAG_E_MGT_TASK_IDENT_DCP_QUE_FAILED UDINT 16#C013F014 MessageId: TLR_DIAG_E_MGT_TASK_IDENT_DCP_QUE_FAILED MessageText: Failed to get handle to DCP task in MGT task. TLR_DIAG_E_MGT_TASK_IDENT_EDD_FAILED UDINT 16#C013F015 MessageId: TLR_DIAG_E_MGT_TASK_IDENT_EDD_FAILED MessageText: Failed to identify Drv_EDD im MGT task.

PNConfigParameters (PARAMS) ¶ InOut: Scope Name Type Initial Comment Constant PNM_MAX_ALARMS UINT 32 max. number of alarms stored internally PNM_MAX_CONFIGURED_DEVICES UINT 256 max. numbers of devices in configuration (enabled and disabled)

Datastructs ¶ Diag NetXFlags (FunctionBlock) IO_SIGNALS (Enum) TIOSignal (Struct)

Diag ¶ NetXFlags (FunctionBlock)

NetXFlags (FB) ¶ FUNCTION_BLOCK NetXFlags InOut: Scope Name Type Comment Input udiFlags UDINT Output DeviceNonExists BOOL 0x1 DeviceNotReady BOOL 0x2 DeviceConfigFault BOOL 0x4 DeviceInvalidResponse BOOL 0x8 DevicePrmFault BOOL 0x10 DeviceDeactivated BOOL 0x20 DiagDataPresent BOOL 0x40 DiagDisappeared BOOL 0x80 DiagBufferOverflow BOOL 0x100 DiagBufferOverwritten BOOL 0x200 DiagPacketTooSmall BOOL 0x400 ModuleDiffBlockReported BOOL 0x800